Franz G Co (darkholy@saintly.com)
Tue, 6 Mar 2001 06:15:26 -0500 (EST)


------Original Message------
From: "Enriquez, Eric" <EEnriquez@hatch.ca>
To: "'gundam@aeug.org'" <gundam@aeug.org>
Sent: March 5, 2001 1:51:33 PM GMT
Subject: RE: [gundam] MODELING ?

It's either with the coat or it could be that the paint isn't trully dry
yet, let it satnd for about a week.

>>Franz,

>>My problem is just after the panel shading all looks perfect >>but once I
>>spray a clear coat to protect the model it darkens all the >>colors across
the
>>board. Actually the black wash is excellent as it makes my >>panel line
very
>>fine and even all across the model even in the corners where >>there are
no
>>lines. It just adds a extra bit of exaggerated shading which >>is in
vogue in
>>model contests now. Any extra bit helps with the judges.
>
>>This is a good example.

>>http://www.geocities.com/chris_1906/P0001287.JPG

>Skip the spray cans.... Airbrush all the way!!!

Depends, sometimes using Gunze Mr. Color saves me the time and effort of
mixing to get the right color (as well as having to borrow the aribrush from
my friend).

-----Original Message-----
From: Franz G Co [mailto:darkholy@saintly.com]
Sent: Friday, March 02, 2001 8:06 PM
To: gundam@aeug.org
Subject: RE: [gundam] MODELING ?

Hmmm... try not doing a black wash for the panel lines instead as it seems
that this part of the paint job is the culprit.

Haven't had this problem for quite some time. Got used to spray cans and
airbrushes!

____________________________________________________________________________
Shop through Barnes and Nobles
http://bn.bfast.com/booklink/click?sourceid=32079226&categoryid=h
help me earn cash too.
______________________________________________
FREE Personalized Email at Mail.com
Sign up at http://www.mail.com/?sr=signup

-
Gundam Mailing List Archives are available at http://gundam.aeug.org/



This archive was generated by hypermail 2.0b3 on Tue Mar 06 2001 - 20:15:38 JST