OmegaGundam (hinchen@mindspring.com)
Mon, 30 Oct 2000 11:10:14 -0800


You guessed it. Filled in big time. And I tried sanding it away but it took me
20 minutes to sand down just part of the big beam cannon for the Rick Dom so
that's not gonna happen. If worse comes to worse I'll break out the exacto
knife.

Peter Savin wrote:

> It might. I'd be inclined to try soaking it in enamel thinner and scrubbing
> with an old toothbrush first. But hey, if the kit's half dead already, what
> have you got to loose? Actually, some diligent sanding can smooth out that
> primer too, provided that it hasn't filled in all the recessed details.
>
> Peter Savin
> bawoo@shiporama.org
>
> ----- Original Message -----
> From: "OmegaGundam" <hinchen@mindspring.com>
> To: <gundam@aeug.org>
> Sent: Monday, October 30, 2000 6:08 AM
> Subject: Re: [gundam] Chlorox for Paint Removal
>
> > Do you think it would work on grey car primer?
> > I bought some and didn't shake the can good enough now half of my kit has
> a
> > thick bumpy layer of car primer on it. :p The other half is great though
> after
> > I got the stuff shaken properly.
> >
> > Peter Savin wrote:
> >
> > > I should mention that it was Testors enamel paint I removed this way.
> > >
> > > Peter Savin
> > > bawoo@shiporama.org
> > >
> > > -----Original Message-----
> > > From: Peter Savin <bawoo@shiporama.org>
> > > To: gundam@aeug.org <gundam@aeug.org>
> > > Date: Saturday, October 28, 2000 11:19 AM
> > > Subject: Re: [gundam] Chlorox for Paint Removal
> > >
> > > >Bleach works, I've used it before. I actually soaked the parts in pure
> > > >bleach, so I'm not sure abou the mixture. I'd suggest being careful,
> it's
> > > >likely that it will degrade some types of plastic. It will also work
> for
> > > >unglueing stuff, believe it or not. I've disassembled models that we
> glued
> > > >together pretty tightly by soaking them in bleach for a day.
> > > >
> > > >Peter Savin
> > > >bawoo@shiporama.org
> > > >
> > > >-----Original Message-----
> > > >From: Diego Bustamante <bustamanted@hotmail.com>
> > > >To: gundam@aeug.org <gundam@aeug.org>
> > > >Date: Saturday, October 28, 2000 9:40 AM
> > > >Subject: [gundam] Chlorox for Paint Removal
> > > >
> > > >
> > > >>Hello, I've heard it said that if you use chlorox bleach in a 1:1
> > > >>water:chlorox mixture you should be able to but your model parts in
> there
> > > >>and paint will float off, is this true or should I continue to use
> oven
> > > >>cleaner?
> > > >>
> > > >>-
> > > >>Gundam Mailing List Archives are available at http://gundam.aeug.org/
> > > >
> > > >
> > > >-
> > > >Gundam Mailing List Archives are available at http://gundam.aeug.org/
> > > >
> > >
> > > -
> > > Gundam Mailing List Archives are available at http://gundam.aeug.org/
> >
> >
> > -
> > Gundam Mailing List Archives are available at http://gundam.aeug.org/
>
> -
> Gundam Mailing List Archives are available at http://gundam.aeug.org/

-
Gundam Mailing List Archives are available at http://gundam.aeug.org/



This archive was generated by hypermail 2.0b3 on Tue Oct 31 2000 - 03:56:45 JST