Peter Savin (firstname.lastname@example.org)
Mon, 25 Sep 2000 09:46:10 -0700
Drybrushing is pretty easy once you get the hang of it. Use a medium sized
brush. Pick up some paint (a lighter shade of the base color), and rub most
of it off on a paper towel, so that you have to rub pretty hard to get any
color on the towel. Then just brush it onto the edges and raised details of
the part. The raised parts will pick up some of the paint, which brings
out the details. Practice on some stuff you don't care about (not
necessarily model parts, coke bottle tops or anything with raised details
will work, even the numbers on the parts runners). Good luck!
----- Original Message -----
From: "OmegaGundam" <email@example.com>
Sent: Monday, September 25, 2000 9:02 AM
Subject: [gundam] Dry brushing /feathering questions...
> Ok I have a question.
> I can do pretty much every other type of painting and technique for
> gundam modeling but I can not figure out how to do the dry brushing. I
> want to make my models the best they can look and this will be vital for
> a few of my models and their weapons.
> So if anyone can give me a few pointers on how to do this with an
> airbrush and acryllic paints I'd be thankful. Or at least a website
> that gives instructions and tips in detail.
> Gundam Mailing List Archives are available at http://gundam.aeug.org/
Gundam Mailing List Archives are available at http://gundam.aeug.org/
This archive was generated by hypermail 2.0b3 on Tue Sep 26 2000 - 01:37:17 JST