Chaos025@aol.com
Sat, 17 Jul 1999 02:40:45 EDT


In a message dated 7/16/99 10:32:48 PM Mountain Daylight Time,
Phil_Abramowitz@email.msn.com writes:

> On loose joints I will cover the round peg (not the polycap) with a thick
> coat of superglue and let it dry overnight. I will then sand this down as
> needed.
>
> Phil

I just put the glue on the peg and place the poly cap back on the peg, and
let it dry. Then I work the poly cap loose. Since Super Glue won't stick to
poly caps, you get a really tight joint this way, without need of sanding.

SJ

-
Gundam Mailing List Archives are available at http://gundam.aeug.org/



This archive was generated by hypermail 2.0b3 on Sat Jul 17 1999 - 15:41:49 JST