Pedro Corzo (email@example.com)
Thu, 17 Jun 1999 10:53:20 -0400
Thanks I appreciate it,
Now can I use my Tamiya primer with it, because in the can it says that is
for plastic and metal?
----- Original Message -----
From: Gus Jae <firstname.lastname@example.org>
Sent: Thursday, June 17, 1999 10:33 AM
Subject: Re: [gundam] Give me a hand, in here
> ----- Original Message -----
> From: Pedro Corzo <email@example.com>
> To: <firstname.lastname@example.org>
> Sent: Thursday, June 17, 1999 8:01 AM
> Subject: [gundam] Give me a hand, in here
> Yesterday I posted the following questions, without any answer:
> What are the differences between these kotobukiya hand sets (extracted
> rainbow ten list)?:
> fist square finger
> >> This is for 1/144 Z and ZZ series models. The mech designs for those
> series, plus others, used squarish fingers. The fist looks like they are
> made out of blocks. Keep in mind that these are not for the smaller
> like the F90s, G, W, V, and X Gundams.
> fist round finger
> >> Same as above, but round fingers instead. They used these for the 0080
> and 0083 mechs.
> palm square finger,
> >> Same as above, this time the palm is opened.
> 1/100 fighting TECCHAN CHOP LARGE,
> >> This was made for the 1/100 G Gundam HG series. Should not use with MS
> not from the F90s, G, W, V, and X Gundams.
> 1/144 fighting TECCHAN CHOP SMALL,
> >> Same as above, in 1/144 scale.
> 1/100 fighting TECCHAN FIST LARGE,
> >> This time this is a fist for the 1/100s
> 1/144 fighting TECCHAN FIST SMALL,
> >> For the 1/144s.
> Hope that helps. Keep in mind that these are made of white metal instead
> plastic or resin, and it requires a bit of work, and a different primer
> You will also need to rike up some joints to put then in the model's
> Hope that was helpful. Happy modeling!! :)
> Gus Jae
> Gundam Mailing List Archives are available at http://gundam.aeug.org/
Gundam Mailing List Archives are available at http://gundam.aeug.org/
This archive was generated by hypermail 2.0b3 on Fri Jun 18 1999 - 00:01:32 JST